Overview
Main idea of Default Configuration
screen is to provide user with ability to restore
Default (original)
network settings (set of IP addresses, Gateways,
DNS servers and so on). This could be necessary,
for example, in order to create new configuration,
based on Default (original)
or Current (live) configuration.
Another possible action is recovery of original
configuration for the selected network adapter in
case if any incorrect changes had been made. Last
thing - it's possible to check current
(live) configuration on all installed network
adapters.
Firstly you have to select which configuration you
would like to see - Default
configuration or Current
(live) configuration. After that you should
select relevant adapter from Network Adapters combobox
(marked with image of network card). By default
network adapter which was selected on the main screen
will be shown there. As a result you will see actual
set of different IP addresses (IP, Subnet Mask,
Gateways and so on). This information cannot be
edited and provided for reference only.
There are two operation buttons within this form:
Load - Use this button to load selected
configuration (different for each of network adapters)
into main screen. Before saving of this data into
one of the configurations (on the Main Screen)
be sure to check adapter name.
Cancel - Use this button to go back to
the Main Screen without any changes.
NOTE: In case if some of the network adapters
were enabled (or disabled) during work of the program
- it could be necessary to update list of the network
adapters. This could be done from the main screen
by clicking Refresh
icon (right above Network Adaptes combo-box).
|
